# Calculate the carbon footprint of scope 1 and 2 with MITECO factors

> Calculate your annual carbon footprint with MITECO emission factors and the CNMC electricity mix, versioned by year and with the source cited. Renewable energy guarantee of origin at zero factor, recalculation with preview before/after and PDF report.

- **Source (source):** https://aistohire.com/aidossier-supplier-file-and-qualification-dossier-175/f/calculate-carbon-footprint-scope-1-and-2-miteco-factors
- **Platform (platform):** AIstoHire
- **Language (language):** en

## In summary

- Carbon footprint of scope 1 and 2 with official MITECO and CNMC factors
- Enter the consumption for the year, the app applies the published emission factors and gives you your tons of CO₂e with the source cited next to each figure.
- Official factors, not made up
- Traceability figure by figure
- The year rules

## Carbon footprint of scope 1 and 2 with official MITECO and CNMC factors

aiDossier calculates your annual carbon footprint without AI and at no cost: it's arithmetic with official emission factors. You choose the year, fill in seven categories of scope 1 and 2 —diesel and gasoline from your own fleet in liters, natural gas in kWh, heating diesel, LPG, refrigerant gas refills in kg, and electricity in kWh— and for each consumption, you indicate whether the data comes from an invoice, a reading, or an estimate. What doesn't apply to you is marked as ‘I don't have’ and stops counting as a gap.

Each figure shows its factor clearly. The app provides two complete versions of factors, one for 2024 and one for 2025, with the source written exactly as: ‘MITECO — Emission factors v.2025 (carbon footprint registry) and CNMC 2024 electricity mix’. Below each consumption, you read the applied factor, its version, and where it comes from, for example ‘0.15 kgCO2e/kWh · v2025 · Peninsular electricity mix 2024 (CNMC)’. The period uses the version corresponding to its year, so the footprint for 2024 does not automatically recalculate with the new factors. And if your supplier gives you a certified factor, you enter it and it is declared as such.

If you purchase electricity with a renewable energy guarantee of origin, you activate the switch and the factor goes to zero by the market-based method, declared as such in the report. When more recent factors come out, the app alerts you and shows you the before and after —your tons with the old version and the new one— before changing anything: it only saves if you confirm it, and the change is recorded in the historical period with a date. Scope 3 is separate: four estimated categories based on spending and activity (travel, employee commuting, waste, and purchases) that are shown as an order of magnitude and are not added to scopes 1 and 2, because it is not a complete inventory and the app states this.

In the end, you close the period and download the report in PDF, with totals, intensities per employee and per million euros billed, the consumption table with the factor applied to each one, a section on methodology and limitations, and the months without data that you have declared. That report is automatically saved in your supplier document file as a compliance document, with a twelve-month expiration and its renewal alerts, ready to be included in the next qualification dossier that you are asked for.

## What's included

- **Official factors, not made up** — two complete versions (2024 and 2025) with the MITECO reference and the CNMC electricity mix written in the app itself, accessible from the ‘Emission factors’ button.
- **Traceability figure by figure** — each consumption shows the applied factor, its version, and its source, and declares whether the data comes from an invoice, reading, or estimation.
- **The year rules** — each period uses the version of factors from its year, so a closed footprint does not change on its own when new factors are published.
- **Recalculation with preview before/after** — when there are more recent factors, you see your tons with the old and new ones before deciding, and what you confirm is dated in the historical record of the period.
- **Well-declared guarantee of origin** — with renewable energy guarantee of origin, the electricity factor goes to zero for market-based and the report makes this explicit, instead of hiding it in a total without explanation.
- **Honest scope 3** — four estimated categories for the client who asks for them, marked as order of magnitude and never added to scopes 1 and 2.
- **No AI and no token consumption** — it is deterministic calculation with published factors, so you can redo it as many times as you want at no cost.
- **Ends in document** — the PDF report is archived only in your supplier document file as a compliance document, expiring in twelve months with renewal notices, and can be included in your qualification dossiers.

## Frequently Asked Questions

### What do I need to have on hand to calculate the carbon footprint of my company?

The consumption for the year you want to calculate: liters of diesel and gasoline from your own fleet, kWh of natural gas and electricity, liters of heating diesel, kg of LPG, and kg of refrigerant gas refills. With the annual summary of the electricity bill and the fuel invoices, you have the essentials. In aiDossier, fill in those seven categories of scope 1 and 2, indicate whether each data comes from an invoice, reading, or estimation, and mark as 'I don't have' what does not apply to you. The app multiplies each amount by the official emission factor and gives you the total in tons of CO₂e.

### Where do the emission factors used in the calculation come from?

From official publications, and they are written in the app itself. aiDossier includes two complete versions of factors: the 2024 version ('MITECO — Emission Factors v.2024 and CNMC Electricity Mix 2023') and the 2025 version ('MITECO — Emission Factors v.2025 and CNMC Electricity Mix 2024'). Each period uses the version of its year, and below each consumption, you can see the applied factor with its version and source, for example, 0.15 kgCO2e/kWh of electricity according to the 2024 CNMC peninsular mix. If your supplier certifies a specific factor, you can enter it, and it will be declared as the supplier's factor.

### I have a 100% renewable electricity contract with a renewable energy guarantee of origin, how is this reflected?

You activate the supplier switch with a guarantee of origin in the electricity category, and the factor becomes zero using the market-based method. The PDF report explicitly states this: scope 2 is calculated location-based unless a declared guarantee of origin is provided, in which case a market-based factor of zero applies. It's your declaration: the app does not ask you to upload the GdO certificate nor does it verify it, so it's advisable to keep it in case your client requests it.

### What happens if new emission factors are published after I have calculated my carbon footprint?

Nothing changes behind your back. If there is a more recent version of factors than the one for the period, the app will notify you and offer to show the before and after: it will show you your scope 1 and 2 tons with the old version and the new one, and only if you confirm will the new values be recalculated and saved. The change is recorded with a date in the historical record of the period, just like the reopening of a closed period, so it can always be explained why a figure changed.

### Does this count as a verified or registered carbon footprint in the official registry?

No, and the report itself states this. aiDossier calculates and documents your scope 1 and 2 footprint with official factors and records the methodology and its limitations, but it does not replace an external verification nor does it process registration in the carbon footprint registry of MITECO. The scope 3 included consists of four estimated categories based on spending and activity, presented as an order of magnitude and not added to scopes 1 and 2: it is not a complete inventory of scope 3. For most client questionnaires and supplier qualification processes, this is sufficient, and if you ever need verification, you have the details of consumption and factors ready to deliver.

- [aiDossier — Supplier file and qualification dossier](https://aistohire.com/aidossier-supplier-file-and-qualification-dossier-175)

## About the platform

**aiDossier — Supplier file and qualification dossier** — an app by AIstoHire. Available at: https://aistohire.com/aidossier-supplier-file-and-qualification-dossier-175/f/calculate-carbon-footprint-scope-1-and-2-miteco-factors

### Other languages

- `es`: https://aistohire.com/es/aidossier-expediente-y-dossier-de-homologacion-175/f/calcular-huella-de-carbono-alcance-1-y-2-factores-miteco
- `fr`: https://aistohire.com/fr/aidossier-dossier-fournisseur-et-homologation-175/f/calculer-empreinte-carbone-portee-1-et-2-facteurs-miteco
- `it`: https://aistohire.com/it/aidossier-fascicolo-fornitore-e-dossier-di-omologazione-175/f/calcolare-impronta-di-carbonio-scope-1-e-2-fattori-miteco
- `pt`: https://aistohire.com/pt/aidossier-processo-de-fornecedor-e-dossie-de-homologacao-175/f/calcular-pegada-de-carbono-escopo-1-e-2-fatores-miteco
- `de`: https://aistohire.com/de/aidossier-lieferantenakte-und-qualifizierungsdossier-175/f/co2-fussabdruck-berechnen-scope-1-und-2-miteco-faktoren
- `bg`: https://aistohire.com/bg/aidossier-dosie-na-dostavchika-i-dosie-za-odobrenie-175/f/izchislyavane-na-vaglerod-otpechatak-obhvat-1-i-2-miteco
- `ja`: https://aistohire.com/ja/torihikisaki-tekikaku-shinsa-dossier-175/f/carbon-footprint-scope1-2-miteco-keisan
- `nl`: https://aistohire.com/nl/aidossier-leveranciersdossier-en-goedkeuringsdossier-175/f/koolstofvoetafdruk-berekenen-scope-1-en-2-miteco-factoren
- `ko`: https://aistohire.com/ko/aidossier-gongeupsa-seungin-seoryu-175/f/tansobaljaguk-gyesan-beomwi-1-2-miteco-baechulgyesu
- `sv`: https://aistohire.com/sv/aidossier-leverantorsakt-och-godkannandedossier-175/f/berakna-klimatavtryck-scope-1-och-2-miteco-faktorer
- `da`: https://aistohire.com/da/aidossier-leverandoermappe-og-godkendelsesdossier-175/f/beregn-co2-aftryk-scope-1-og-2-miteco-faktorer
- `ar`: https://aistohire.com/ar/aidossier-mlf-almurd-wmlf-alaatmad-175/f/hisab-al-basma-al-karbuniya-nitaq-1-wa-2-awamil-miteco
- `no`: https://aistohire.com/no/aidossier-leverandoermappe-og-godkjenningsdossier-175/f/beregne-karbonavtrykk-scope-1-og-2-miteco-faktorer
- `fi`: https://aistohire.com/fi/aidossier-toimittajakansio-ja-hyvaksyntadossier-175/f/hiilijalanjalki-scope-1-ja-2-miteco-kertoimet
- `zh`: https://aistohire.com/zh/aidossier-supplier-approval-dossier-175/f/carbon-footprint-scope-1-2-miteco-factors
- `pl`: https://aistohire.com/pl/aidossier-teczka-dostawcy-i-dossier-kwalifikacji-175/f/obliczanie-sladu-weglowego-zakres-1-i-2-wspolczynniki-miteco
- `he`: https://aistohire.com/he/aidossier-tik-spk-vtik-hsmkh-175/f/chishuv-tavit-regel-pachmanit-scope-1-ve-2-gormei-miteco
- `cs`: https://aistohire.com/cs/aidossier-spis-dodavatele-a-schvalovaci-dossier-175/f/spocitat-uhlikovou-stopu-rozsah-1-a-2-faktory-miteco
- `id`: https://aistohire.com/id/aidossier-berkas-pemasok-dan-dosir-homologasi-175/f/hitung-jejak-karbon-cakupan-1-dan-2-faktor-miteco
